溫濕度傳感器STHR01

Relative humidity and temperature sensor
- 相對溫度和濕度傳感器
- Pre-calculated temperature and humidityread out, no extra calculation needed
- 預先計算的溫度和濕度讀出，無需額外計算
- Dew Point Calculation possible
- 可以計算露點
- Fully Calibrated, Digital Output
- 完全校準，數字輸出
- Excellent Long Term Stability
- 良好的長期穩定性
- No Extra Component Required
- 無需額外的組件
- Ultra Low Power Consumption
- 超低功耗
- Fully Interchangeable
- 完全可互換
- Small Size
- 尺寸小
- Automatic Power Down
- 自動斷電

Product Summery
產品簡介
The STHR01 is a MCU based temperature and relative humidity sensor module, comprising a SPI interface (master mode) for direct temperature and humidity read out. The digital output is pre-calculated and no extra calculation is required. The system applied two sensor elements: NTC type high precision temperature sensor and a resistor type relative humidity sensor from Japan. With a very unique and patented relative humidity calculation algorithm, the system can assure accurate relative humidity output through fine tuned temperature compensation mechanism. Thus very high accurate reading of humidity in the full temperature range (0-50C) can be assured.
該STHR01是一款基于溫度和相對濕度的傳感器模塊，包括一個 SPI 接口（主模式）為直接的溫度和濕度讀出。數字輸出是預先計算并無額外計算要求所必須的。改系統適用于兩個傳感器要素：NTC 型高精度溫度傳感器和電阻式相對濕度傳感器來自日本。有一個非常獨特的專利和相對濕度的計算算法，該系統通過良好的溫度調節補償機制可以保證準確相對濕度輸出。如此高精度讀濕度在整個溫度范圍（ 0 - 50 C ）都可以保證。

Applications
適用產品
- HVAC
- HVAC 產品

- Consumer Products
- 消費類產品
- Weather Stations
- 氣象站
- Humidifiers
- 加濕機
- Dehumidifiers
- 抽濕機
- Test and Measurements
- 測試與測量
- Data Logging
- 數據記錄
- White Goods
- 白色家電